What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 16:07

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This device then solves the entire problem.
The other is “what does a “fuse” do?”
What does it mean if you dream your dad died?
For this case there are devices called Metal oxide varistors (MOV).
The third is lightning and “how it gets conducted into a home.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But it can get overloaded, and no longer works.
Can we state Alia Bhatt as the most versatile actress in Bollywood now?
What does a fuse do?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–14 [Omar Gharbi Omar Gharbi ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
I post the exact comment here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Edit 2024–10.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
(Dc diagram shown, AC is similar).
What ended your relationship with your best friend?
It seems Mohan does not understand the difference between a comment and an Answer.
At least they know the answer if they wanted it.
At one ohm, the resistor has a maximum of 1 watt power.
Why do I sweat between my legs all the time, top off my legs, all way down?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Barnstars:
Here is a simplified AC power diagram.
Why has no country adopted the SA80/L85 rifle?
These are simplified answers to the original question, and does not change anything I wrote above.
Upvotes:
In schematic diagrams this is the symbol for a fuse:
One is “what exactly is in a ‘surge protector’ ? ”
But… the neutral is now “floating” because of the 1 ohm resistance.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Can one still satisfy the desires of Black women with a more discreet endowment?"?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
the problem then depends on "how fast does the fuse operate?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
First Sentence:
but I think this circuit , shows a few more pieces.
It also is a device that limits the change in current flow.
What are some cute stories with your crush?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
but this device (an Inductor) … impedes the rapid changes in the current.
[old diagram got deleted by accident]
eight
This one hit behind the barn.
The bolt then partially travels down the line to your home.
Why is going on a date today so much different than it was when I was young?
2024–10–10[John johnson John Johnson ]
These devices are installed between the “hot” and “neutral” and protective ground.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
A fuse is a non-resetable over current circuit protector.
There are three different concepts here that are getting confused.
a photo is worth a thousand words.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What is lightning?
Now when you have a certain ac resistance, then a current flows in a loop.
The MOV will conduct when the voltage exceeds 50% of line voltage.
A circuit breaker is similar, but is resettable.
what exactly is a ‘surge’ protector?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is 'the assistant's answer'
Because the load is inductive, the current lags the voltage.(by a bit).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is where the MOV conducts again, and dissipated the energy.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then asserts :
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
nine
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–16 [ OO OLAOYE OYEBODE ]
An AC voltage/ current source, and an ac inductive load.
He then describes Rainy Season and Lightning.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
so, what happens?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So, the voltage could go up to 500 volts, and the fuse will not open up.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There are two important concepts here.
One
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then describes the function of a fuse.
[image of Common-mode choke]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.